Table of Contents
Advertisement
Doors
See pictures on the next page.
Tools
● Drill
● Level
● Step ladder
● Tape measure
Parts
● ¼ x 2" Bolt (8)
● ¼ Nut (8)
● ¼ Split lock washer (8)
● ¼ Flat washer (16)
● Door frame single GH
● Door GH (1)
Door Frame Installation
1. Once the verticals (consisting of ground posts, ridge poles, ridge pole extensions,
tension brace bands) have been secured with #10 self tap. Stand the door frame up and
temporarily hold to verticals, with clamps.
2. Confirm plumb along door verticals and level along door frame horizontals. Use
shims or scrap wood to make adjustments to level and plumb until door frame bolts are
plumb, level and secure.
3. Drill a ¼" hole through the ridge pole uprights from inside of the door frame using the
¼" hole on the outside of the door frame (and up against the upright). (Picture marked
Step 1)
4. Secure with a ¼" X 2" bolt, lock washer, flat washer and ¼" nut placed on both sides
of the frame. Most ½" deep sockets will fit into the larger hole of the door frame. (Picture
marked Step 2)
Need Help?
contact@bootstrapfarmer.com
Page 26
www.bootstrapfarmer.com
Advertisement
Table of Contents
