Door Lock Channel - Bootstrap Farmer 14 Hoop House Instruction & Owner's Manual

Door Lock Channel

Lock Channel will install OVER the hinges on both the door and the frame. The lock
channel you installed on the vertical supports in the previous step will act to secure the
outside edge of the plastic.
1. Cut lock channel to fit across top of door frame, door top, door bottom and cross
bar support from inside edge to beginning of latch mounting plate. (Verticals will
need to be comprised of at least two pieces of lock channel.)
2. Attach lock channel on door frame across the top edge.
3. Install lock channel across the top and bottom of the door(s).
4. Install vertical door lock channel on both sides but not over the latch mounting
plates.
5. Install cross bar lock channel.
6. When installing plastic you will insert spring wire into all lock channels and then
cut around the edge between the door and the frame.
Need Help? contact@bootstrapfarmer.com
Page 32
www.bootstrapfarmer.com