8. Installing the diagonal supports on the 20' wide kit, is similar to the steps you
have already taken. Install a tension band over the hoop, use a bolt to attach the
tension band to the diagonal, secure with the nut. Install a tension band on the
horizontal crossbar. Install the other end of the diagonal with a bolt and nut, to
the tension band. Position the bar close to a 45 degree angle as shown below.
9. Tighten bolts on tension bands holding the diagonal brace in place.You should
have a truss that looks similar to the one pictured below.
Need Help?
contact@bootstrapfarmer.com
Page 38
www.bootstrapfarmer.com