Opening The Locks; Users (Or Override Users): Opening Without Time Delay; Users: Opening With Time Delay - Tecnosicurezza TechMaster User Instructions

Hide thumbs Also See for TechMaster:
Table of Contents

Advertisement

TechMaster
 A power adapter (ref. N1212) with power supply interface (ref. T6005/W or T6005) both
provided by Tecnosicurezza.
Low battery warning
A long beep together with the message "LOW BATTERY" on the display, indicates a low battery
level which should be immediately replaced.
Silent alarm
With this function enabled, enter an opening code increasing or decreasing by one number
the last code digit (ex. 03-030304 or 03-030302 instead of 03-030303): the lock opens and
simultaneously the output of the alarm interface or I/O interface is activated.
Tamper alarm (required for class C)
This function provides a blocking of the system and displays a warning message "ANTI_TAMPER
ALARM" whenever the keypad is removed from the door, or the battery compartment get
opened. Insert a valid code to unblock the keypad and restore the normal functioning.
Audit
The lock saves the last 6000 operations with time, date, user and operations description. The
keypad can save the last 250 operations. It is possible to download the events for locks and
keypad by using the Tecnosicurezza DMT Audit software. For further information refer to the
IU_DMT_Audit_XX.
IMPORTANT
Some options/characteristics reported in this user manual, can only be used if previously
programmed through the setup software. Therefore, please refer to the user manual
IU_TechMaster_setup_XX. Please contact Tecnosicurezza for further information.

Opening the locks

Users (or Override users): opening without time delay

Power up the keypad. Enter an opening code and insert the Dallas key,
if programmed. LCD displays:
Open the lock within 3 seconds.

Users: opening with time delay

Power up the keypad. Enter an opening code and insert the Dallas key,
if programmed.
LCD displays the time delay counting:
At time elapsed, the LCD displays the open window counting time.
Press
, LCD displays:
IU_TechMaster_07_eng
User instructions
OPEN
TIME DELAY
00:59
OPEN WINDOW
00:01
ENTER CODE
X X – X X X X X X
9 of 28

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TechMaster and is the answer not in the manual?

Table of Contents