Manager (Or Override Manager): Opening Without Time Delay; Manager (Or Override Manager): Opening With Time Delay; Opening With Dynamic Codes (Dallas Key Option) - Tecnosicurezza TechMaster User Instructions
Hide thumbs
Also See for TechMaster:
- User instructions (28 pages) ,
- Troubleshooting manual (5 pages) ,
- User instructions (2 pages)
Table of Contents
Advertisement
User instructions
Enter an opening code and insert the Dallas key, if programmed. LCD
displays:
Open the lock within 3 seconds.
Manager (or Override Manager): opening without time delay
Power up the keypad. Press
press it two times for opening with Manager Ovr code. LCD displays:
Enter Manager code and insert the Dallas key, if programmed (or enter
Manager Ovr code and insert the Dallas key, if programmed). LCD
displays:
Open the lock within 3 seconds.
Manager (or Override Manager): opening with time delay
Power up the keypad. Press
press it two times for opening with Manager Ovr Code. LCD displays:
Enter Manager code and insert the Dallas key, if programmed (or enter
Manager Ovr Code and insert the Dallas key, if programmed). LCD
displays the time delay counting:
Once the time delay has elapsed, the LCD displays the open window
counting time.
Press
, LCD displays:
Press
for opening with Manager code or press it two times for
opening with Manager Ovr code. LCD displays:
Enter Manager code/Manager Ovr code and insert the Dallas key, if
programmed. LCD displays:
Open the lock within 3 seconds.
Opening with dynamic codes (Dallas key option)
Power up the keypad. Insert the Dallas dynamic key in the Dallas
reader. LCD displays:
Enter the dynamic code and press
Open the lock within 3 seconds.
If programmed by the software Dyama or DyamaWeb for dynamic
codes creation, LCD displays the closing code when the bolt re-closes.
Please refer to the user manuals IU_Dyama_XX or IU_DyamaWeb_XX
for further information.
WARNING: dynamic codes must be used respecting the sequence of
activation time in which they have been created by the software
10 of 28
for opening with Manager code or
for opening with Manager code or
. LCD displays:
TechMaster
OPEN
MANAGER CODE
X X X X X X
OPEN
MANAGER CODE
X X X X X X
TIME DELAY
00:59
OPEN WINDOW
00:01
ENTER CODE
X X – X X X X
MANAGER
X X X X X X
OPEN
DYNAMIC CODE
X X X X X X X X X
OPEN
CLOSING CODE
179
DYNAMIC CODE
DELETED
IU_ TechMaster_07_eng
Advertisement
Table of Contents
Need help?
Do you have a question about the TechMaster and is the answer not in the manual?