Tecnosicurezza TechMaster User Instructions page 6

User instructions
 If a dynamic/activation code is entered more than 30 minutes
before its beginning validity time, LCD displays:
 If a dynamic/activation code is entered more than 30 minutes
later than its beginning validity time, LCD displays:
 To open or access the menu in dual mode (if programmed),
enter the first code. LCD displays:
Then, enter the second code.
Using your Keypad in Scramble mode (required for class C)
Scramble mode is an additional security which allows to enter a code without using always the
same keys. User ID instead can still be entered as well as the Configuration menu code
To enter an opening code or a menu code in scramble mode, follow the steps below:
Enter the user ID. LCD displays:
Enter the user code by pressing key
or decrease by 1 the digit selected ([X]). Press
switch to the next digit. All digits already entered are indicated by
capital symbol.
After entering the last digit, press
Press to come back to the previous digit. When the first digit is
selected, press
Shortcuts
Press and hold for 2 seconds the button related to the needed function:
= Change Manager code (01), users, override users, Master and Manager ovr (if configured)
= PIN entering for dynamic codes (after dynamic codes activation)
= Test mode
6 of 28
or
to confirm the code.
again to enter again the user ID.
, respectively to increase
to confirm and to
IU_ TechMaster_07_eng
TechMaster
WRONG DYNAMIC
CODE
WRONG DYNAMIC
CODE
ENTER 2° CODE
X X – X X X X X X
ENTER CODE
[5] x x x x x x x
ENTER CODE
X X X X X [ 8 ] x x