Advertisement
<Affixing the labels>
(1) Affix the supplied label to the position shown
below.
<C287/C227>
Label
<367/287/227>
Label
(2) Affix the supplied label (Super G3 label) to the
position shown below.
Super G3 label
3. Configuration procedures
<Setting the FAX>
(1) Plug the power cord into the power outlet and
turn ON the power switch.
(2) Display the Service Mode screen.
(For details of how to display the Service Mode
screen, see the service manual.)
(3) Touch "System 2."
(4) Touch "Option Board Status."
(5) Touch "Set" of FAX (circuit 1).
(6) Touch "END" and touch "Exit."
(7) Turn OFF and ON the power switch.
Note:
• When displayed the Service Mode screen, be
sure to turn OFF the power switch after exiting
the Service Mode screen and wait for 10 sec-
onds or more before turning ON.
• After turning ON the power switch, be sure to
conduct the following procedures in 'Country
code setting' and 'FAX initialization' after con-
firming the message 'Preparing Scan/Fax...' is
turned off.
(8) Display the Service Mode screen.
(For details of how to display the Service Mode
screen, see the service manual.)
(9) Touch "System 1."
(10) Touch "Marketing Area."
(11) Touch "Fax Target."
E-7
Advertisement
