Table Of Contents - Agilent Technologies G1992A User Manual

Content
1 Installation
Upgrade Preparation
Installation
2 Mass Reference Solution
3 Safety
Nanospray Ion Source User Guide
7
8
To remove the ESI or Agilent Jet Stream source
To upgrade the gas distributor
To upgrade the stainless steel end plate
To assemble and install the new spray shield and gas diverter assembly
16
To install the source
To set the position of the Counter Electrode
To set up MassHunter program for the Nanospray Ion Source
To install the power cord and camera
To assemble the Infusion Sample Delivery System
To infuse solution through the Infusion Sample Delivery System
To assemble the Extension Tube column support assembly for LC analysis
To install the Needle Sleeve Assembly into the Nanospray Ion Source
To install the Nanospray Slide Assembly for inline analysis
To adjust the LED camera light
To prepare the Low Mass IRM stock solution
To prepare the IRM working solution
To apply the IRM solutions
To enable reference mass correction
To clean the wick and wick cover
53
Safety Issues 54
Safety Symbols 58
9
12
17
22
41
43
46
47
50
52
8
18
21
25
26
36
45
13
27
32
5