Installation
72
Installing the washing machine
Danger due to incorrect installation.
Improper installation of the washing machine may result in injury
and damage.
The washing machine must be installed by Miele Customer Service
Department or by an authorised dealer.
General operating conditions
This washing machine is intended only for use in a commercial envir-
onment and must only be operated indoors.
Ambient temperature in installation room: 0 °C to 40 °C
Relative humidity: non-condensing
Depending on the nature of the installation site, sound emissions and
vibration may occur.
Tip: Have the installation site inspected and seek the advice of a pro-
fessional in instances where increased noise may cause a nuisance.
Do not install in rooms which may be subject to very
low temperatures
Risk of damage due to frost.
Frozen hoses are at risk of tearing or bursting. The reliability of the
electronic module may be impaired at temperatures below freezing
point.
Do not install the washing machine in a room where there is a risk
of frost.
Installing and mounting the washing machine
The washing machine must be level and securely installed. The
washing machine must be secured to the floor after installation.
To secure the washing machine to the floor, you can drill through the
existing holes in the base frame.
Disassemble the two side panels.