Teka Mistral Plus Operating Instructions Manual page 38

Error
Suction power too small
(Smoke/gases are hardly sucked
off) the turbine does not reach the
necessary speed.
The Mistral does not start.
Motor stops within operation.
Operating Instructions Mistral (Plus), Mistral Eco (Plus), Mistral Super Plus 110 and 230V vers. 4.10
Cause
Overheating through huge filter
pollution.
Failure on the Mistral.
Plug connection of the current
supply is not or wrongly put in.
No current on plug socket.
Connecting cable for external
control not or wrongly plugged in.
No control signal for remote
control of the machine.
Failure on the Mistral.
Overheating through huge filter
pollution. The thermal protection of
the turbine is released.
The turbine is stalled through
tearing of the filter unit!
Elimination
Turn off the Mistral, exchange the
filter-unit. Switch on the Mistral
only after the turbine has cooled
itself.
Contact the Trotec Produktions- u.
Vertriebs GmbH. If necessary
send the Mistral to Trotec.
Examine the connection of the
current supply, if necessary
connect correctly.
Examine current mains, if
necessary repair disturbance.
Examine the connecting cable for
the external control, if necessary
plug in correctly.
According to the manual eliminate
disturbance.
Contact the Trotec Produktions- u.
Vertriebs GmbH. If necessary
send the Mistral to Trotec.
Turn off the Mistral, exchange the
filter-unit. Switch on the Mistral
only after the turbine has cooled
itself.
No warranty claim is given!
The exchange of the turbine is
necessary. The filter-unit and the
activated carbon must be
exchanged also. It is absolutely
necessary that all parts of the
Mistral have to be cleaned, in
particular the housing inside.
Page 38 of 47