9.
Error tracing and break down search
Error
No suction power
(Smoke/gas are not sucked off).
No suction power and/or error
announcement „change filter" with
a new filter-unit inserted.
Suction power too small
(Smoke/gases are hardly sucked
off).
Operating Instructions Mistral (Plus), Mistral Eco (Plus), Mistral Super Plus 110 and 230V vers. 4.10
Cause
Suction hose not attached at the
Mistral.
Suction hose not attached at the
machine.
Damage of the suction hose.
Suction hose is attached to the
wrong machine.
Suction hose is connected to the
wrong opening of the machine.
Inlet clogs.
Clean gas way clogs.
Compressed-air hose kinked.
Suction air way too long.
Filter-unit is full.
Damage of the suction hose.
The suction hose is not attached
correctly at the machine.
The suction hose is not attached
correctly at the Mistral.
Clean gas way narrows.
Suction hose is connected to the
wrong opening of the machine.
Inlet narrows.
Elimination
Attach the suction hose at the
Mistral.
Attach the suction hose at the
industrial laser.
Exchange the suction hose.
Attach the suction hose to the
correct machine.
Attach the suction hose to the
correct opening of the machine.
Examine inlet. If necessary repair
disturbance.
Examine clean gas way. If
necessary repair disturbance.
Examine compressed-air hose. If
necessary repair disturbance.
Test the Mistral with a short length
of hose. If necessary, use only a
hose no longer than 2,5 m.
Exchange filter-unit, deposit old
filter-unit duly!
Exchange the suction hose.
Examine the fitting of the suction
hose on the machine, if necessary
attach the suction hose again.
Examine the fitting of the suction
hose on the Mistral, if necessary
attach the suction hose again.
Examine clean gas way, if
necessary repair disturbance.
Attach the suction hose to the
correct opening of the machine.
Examine inlet, if necessary repair
disturbance.
Page 37 of 47
Need help?
Do you have a question about the Mistral Plus and is the answer not in the manual?