Safety References For The Operation Of The Mistral; Safety References To The Maintenance - Teka Mistral Plus Operating Instructions Manual

2.7.

Safety references for the operation of the Mistral

With all work which concern:
–
the operating,
–
the re-equipment or the adjustment of the Mistrals and its safety devices,
–
the inspection,
–
the maintenance and
–
the repairing
consider the turn on and turn off processes in accordance with the operating instruction and the references to
the maintenance!
The Mistral only may be operated, if all protection and safety devices e.g. solvable protection devices,
housing bolts etc. are on its place and functional!
Before starting up the personnel has to make itself familiar around the Mistral.
The Mistral may never remain unsupervised during the operation!
At least once per shift the Mistral must be examined for outwardly recognisable damage. Changes (including
that of the operational behaviour) have to be announced immediately to the responsible shift leader and/or
the plant manager.
Stop and secure immediately with malfunctions at the Mistral. Disturbances are to be eliminated immediately
through trained specialists.
2.8.

Safety references to the maintenance

Before beginning inform the operating personnel about the execution of special- and maintenance work.
Keep the periods for tests/inspections prescribed in this operating instructions.
For the execution of maintenance work appropriate workshop equipment is absolutely necessary.
Illuminate maintenance ranges, to the extent necessary, additionally with hand or stand lamps.
For Maintenance or repair the Mistral must be switched off and secured against unexpected restarting, by:
–
switching off at the circuit breaker and afterwards
–
disconnecting the device from the mains by pulling out the plug of the mains cable.
With prepare-, assembly or maintenance work do not reach into the covering grid plate of the turbine or the
filter chambers in the filter-unit.
After switching off/stopping the Mistral wait for the stop of the turbine.
To avoid current impacts do not open electrical construction units as well as housings and covers.
Do not touch damaged, torn life (voltage) parts.
Make no program modifications at programmable control systems.
Work on electrical equipment may be made only by trained specialists!
Check regularly for damage on cable and hose connections, particularly such at mobile construction units
and if necessary exchange.
Exchange the filter-unit in the indicated and/or in appropriate time/intervals, even if no safety/relevant lack is
recognisable!
Tighten always again solved screwed joints with maintenance and repairs!
Operating Instructions Mistral (Plus), Mistral Eco (Plus), Mistral Super Plus 110 and 230V vers. 4.10 Page 13 of 47