Program; Keypad; Display - Teka Mistral Plus Operating Instructions Manual

Key PLUS
By that the number of revolutions of the Turbine(n) in %-steps is increased. You can notice the increase at
the noise increase. The changed value is taken over directly.
Key MINUS
By that the number of revolutions of the Turbine(n) in %-steps is reduced. You can notice the decrease at the
noise reduction. The changed value is taken over directly.
Error
Run
LED
If the LED error shines red, the filter is full (It can also mean: change the brushes, change the activated
carbon.) and must be exchanged, since the cleaning achievement of the Mistral is reduced.
LED Run (Green)
Indicates that the Mistral is switched on.
6.4.

Program

6.4.1.

Keypad

Version 3.01
Operating button:
Confirmation button:
Turning speed button:
6.4.2.

Display

Standard-announcement:„___%____h___%"
Filter accumulation
Operating hour
Turning speed
— Indication of current filter saturation in %, max. reading 100%
— Operating hours from 0 h to 999999 h (The system counts operating hours as long as the turbine
receives a control-system signal.)
— Turning speed of turbine from 0% to 100%
Operating Instructions Mistral (Plus), Mistral Eco (Plus), Mistral Super Plus 110 and 230V vers. 4.10
ON / OFF
Enter
„+" and "-„
%
h
%
Page 24 of 47