Operating Overview; Language Selection - JUMO miroTRON Brief Instructions

6.1.1

Operating overview

Button functions
Button or button com-
bination (permanent)
Up
Down
Back short (< 3 s)
Back long (> 3 s)
Menu/OK short (< 3 s)
Up + Down long (> 3 s)
Down + Menu/OK
very long (> 5 s)
6.2

Language selection

After switching on the device for the first time, the user can either confirm the flashing displayed lan-
guage with "OK" or select another language using the "Up"/"Down" buttons and then confirm this with
"OK".
After applying a language, the device automatically sets this parameter to "OFF", meaning that language
selection is not necessary the next time the device is switched on.
If, at a later point, another user is also to have the option of selecting a language, the configuration pa-
rameter "LANGUAGE SELECT. POWER ON" can be set to "ON" in the menu (Configuration > System
data).
The language of the device texts can be changed at any time in the configuration settings. This is irre-
spective of the language selection after switching on the device.
In basic status
Increase setpoint value
In manual mode: in-
crease output level
Decrease setpoint value
In manual mode: reduce
output level
Function configurable
(default setting:
no function)
Function configurable
(default setting: without
function)
Call up main menu
Start/stop autotuning
+
Call up menu for level in-
hibit
+
Function
When navigating
Select previous menu
item or parameter
Select next menu item
or parameter
Move to menu level
above
---
Call up sub-menu or
switch to editing mode
---
---
6 Operation
When editing
Increase value or go up
in picklist
Decrease value or go
down in picklist
Leave editing mode
without changes
---
Leave editing mode with
changes
---
---
25