Operation; Display And Control Elements - JUMO miroTRON Brief Instructions

6

Operation

6 Operation
The primary operator interface on the device is the front side membrane keyboard with the display. It
enables users to quickly operate and configure the device at the device installation location. Non-rele-
vant parameters, sub-parameters, selector and selection settings are hidden by the software for opera-
tion of the device if
• the device does not have the hardware,
• the option is not enabled,
• the function is switched off,
• the function does not match the parameter.
The individual parameters for device setting are organized in different levels that can be inhibited. A level
inhibit helps to prevent accidental or unauthorized operation.
As soon as a value can be edited, it starts flashing on the display. If you click the "OK/Menu" key, the
device accepts the set value. You can abort the process and retain the old value by pressing the "BACK"
key.
The 30-day test version of the setup program allows you to easily configure the device using a PC. The
following functions can only be configured with the setup program.
• User level
• Customer-specific linearization
The setup program is available to download. The license number for the full version of the setup program
is available for a fee and can be requested from your sales partner.
6.1

Display and control elements

1 Display 1 - 18-segment LCD display (e.g.
actual value), 4-digit, white;
also for displaying menu items, parameters
and text
3 Timer (illuminated = on, flashing = started),
Temperature Unit
5 Up (in the menu: increase value, select pre-
vious menu item or parameter; increase set-
point value or, in manual mode, output level)
7 Back (in menu: back to previous menu level,
exit editing mode without change; in basic
status: configurable function)
24
(5) (1)
(6) (4) (3)
2
4
6
8
(7)
(2) (8)
Display 2 - 18-segment LCD display (e.g.
setpoint value), 7-digit green;
also for displaying menu items, parameters,
values, and text
Switch position of the digital outputs (yellow
= active)
Down (in the menu: reduce value, select
next menu item or parameter; reduce set-
point value or, in manual mode, output level)
Menu/OK (call up main menu, switch to sub-
menu/level, switch to editing mode, exit edit-
ing mode with change)