3 Mounting
3.4
Permissible operating conditions at the pocket
3.4.1 Pockets U, US and UH
A
3.4.1.1
Protection tube in steel U and US
3.4.1.2
Protection tube in steel U and US
3.4.1.3
Protection tube in brass U
3.4.1.4
Protection tube in brass UH
12
The values below refer to the maximum loading on the mounting concerned.
The maximum pressure that can be sealed depends on the mounting condi-
tions and may be lower.
Material:
Tube:
Screw-in nipple:
Weld-in nipple:
Temperature
8 x 0.75 mm
100°C
150°C
Material of tube and nipple: X 6 CrNiMoTi 17 122
100°C
150°C
Material of tube and nipple: brass (CuZn)
100°C
150°C
Material of tube and nipple: brass (CuZn)
110°C
St 35.8 I
9 SMnPb.28 K
16 Mo 3
Tube diameter
10 x 0.75 mm
or taper
max. permissible pressure
89 bar
83 bar
92 bar
88 bar
50 bar
48 bar
16 bar *
15 x 0.75 mm
72 bar
67 bar
74 bar
71 bar
40 bar
39 bar
48
45
50
48
27
26