Safety Information; Qualification Of Personnel - JUMO miroTRON Brief Instructions

1 Safety
The device has been manufactured in compliance with applicable standards and directives as well as
the applicable safety regulations. Nevertheless, improper use may lead to personal injury or material
damage.
To avoid danger, only use the device:
• For the intended use
• When in good order and condition
• When taking the technical documentation provided into account
Risks resulting from the application may arise, e.g. as the result of missing safety provisions or wrong
settings, even when the device is used properly and as intended.
1.3

Safety information

DANGER!
Risk to life due to electric shock
Risk of injury when touching live parts!
 Only qualified electricians are allowed to connect and install an electrical device that is not already
ready to use.
 Before working on the system or device, switch off the voltage and secure it so that it cannot switch
on again.
 Do not touch electronic components when they are live.
 Always observe the relevant accident prevention regulations and safety requirements for electrical
devices.
CAUTION!
Risk of device damage
If the device is not supplied with the voltage specified on the nameplate, this could cause damage to the
device.
 Only supply voltage from a voltage source that matches the specifications on the nameplate.
CAUTION!
The front of the device and housing have different protection types!
The protection type IP65 (front-side) is only guaranteed if the seal is flush and even.
 Use the mounting frame or both mounting elements as shown in the figure and ensure an even at-
tachment!
1.4

Qualification of personnel

This document contains the necessary information for the intended use of the device to which it relates.
It is intended for staff with technical qualifications who have been specially trained and have the appro-
priate knowledge in the field of automation technology.
The appropriate level of knowledge and the technically fault-free implementation of the safety informa-
tion and warnings contained in the technical documentation provided are prerequisites for risk-free
mounting, installation, and startup as well as for ensuring safety when operating the described modules.
Only qualified personnel have the required specialist knowledge to correctly interpret and implement the
safety information and warnings contained in this document in specific situations.
6