Advertisement
3-70
Help
New Error
If the error is replaced by a different error or dash code after the
AUTOMATIC OPERATION
key has been pressed, the original error was
being caused by a combined input problem and operating problem.
Look up the error code displayed by the instrument after the
AUTOMATIC OPERATION
key
was
pressed. Take the action recommended
for "Input Problem".
Remember
Because of the wide variety of input signals and the operating
flexibility of the
HP
8902Af
it is not possible to list all
recovery actions
for
each error code. After using the table to
determine the
cause
of the problem, you may discover other error
recovery procedures that are better suited to your application.
Table 3-7 Modulation and Audio Error
Codes
(1 of 3)
Advertisement
Chapters
