Advertisement
Help
2-1 1
Same
Error
If the error or reading remains the same after the AUTOMATIC OPERATION
key has been pressed, the error is being caused by an input problem. Look
up the error code in Table 2-3 and take the action recommended for
"Input Problem".
No
Error
If the error goes away after the AUTOMATIC OPERATION key has been
pressed, the error
was
caused by an operating problem.
Look
up the error
code in Table 2-3 and take the action recommended for
"Operating Problem".
New
Error
If the error is replaced
by
a different error or dash code after the AUTO-
MATIC OPERATION key has been pressed, the
o r i g i n a l error was being
caused by a combined input problem and operating problem. Look up the
error code displayed by the instrument
after
the AUTOMATIC OPERATION
key
was
pressed. Take the action recommended for "Input Problem".
Remember
Because
of
the wide variety
of
input s i p l s and the operating
flexibility of the HP
8902A,
i t is not possible to list all
recovery actions for each error code. After
using the table to
determine the cause
of
the problem,
you
may discover other error
recovery procedures that are better suited to your
application.
Table
2-3.
RE Frequency and Frequency
Error,
Error Codes (1
of
2)
Advertisement
Chapters
