Keenbot Operational Manual
7 Maintenance
7-1 Taking Care of the Machine
■
Daily care
After using the machine, clean any dirt with a soft cloth that has been moistened with water and
wrung out tightly, then wipe off remaining water with a dry cloth and dry it well.
■ Before wiping off any dirt on the machine, be sure to turn the power off, pull out the
charger from the outlet and remove the charging plug of the charger from the machine.
■ Clean the LiDAR sensor, the 3D camera, the top camera, the trays, the touch display and the
expression display every day with a microfiber cloth.
* Microfiber cloth is not included.
■ When disinfecting the exterior of the machine, use disinfecting ethanol. Do not spray the liquid
directly onto the machine. Soak it into a disinfecting wipe and clean the machine with it. If the
machine is very dirty, wipe off the dirt with a cloth soaked in neutral detergent.
40
7 Maintenance