SoftBank Keenbot T5 Operational Manual page 41

Keenbot Operational Manual
■
Monthly care
Regularly inspect and clean the bottom of the machine every month. If it is extremely dirty, lay the
machine on its side on a soft floor and wipe it with a cloth soaked in neutral detergent.
■ For safety reasons, be sure to proceed with two or more people, and clean the
secondary wheels as necessary.
1
Hold the handles and lay the machine on its side on a soft floor.
■ Remove hair and dust caught in the wheels, and clean the wheels by wiping them with
a damp cloth. Proceed to step 2 if any hair or dust cannot be removed.
2
Use a hex wrench (10 mm) to remove the screws and bolts from the secondary wheels and
wipe off any dirt.
■ Remove any dust with a resin spatula until you can see the groove on the wheel.
■ Be careful not to lose the screws or bolts when removing them.
3
Attach the wheels with the screws and bolts previously removed.
■ Tighten the screws sufficiently. Confirm that the secondary wheels are attached
correctly by manipulating them.
41
7 Maintenance