SoftBank Keenbot T5 Operational Manual page 10

Keenbot Operational Manual 2 Safety Precautions
When delivering hot or unstable dishes (liquid in a glass, soup in a bowl, etc.), carry out a
test run to make sure that no liquid will overflow or drip during operation.
Otherwise, it may cause drop, damage, injury or allergenic contamination.
Always unplug the charging cord from the wall outlet and the charging plug from the
machine before use or maintenance.
For more details, see "2-9 About Maintenance" P13.
When changing the walking speed of the machine, carry out a test run at desired speed
and proceed with caution.
When the machine is on, the wheels are locked by default.
To manually move the machine when the power is on, first unlock the wheels by pressing
the Stop button.
NOTE
Use the machine within the 0°C to 45°C temperature range, and 5% to 85% humidity range.
Store the machine in a dry place without dust between -10°C to 70°C, and 10% to 90% of
humidity range.
Otherwise, it may cause fire, injury, electric shock, damage, malfunction, overheating, leakage
or chemical explosion or other damage to the machine or charger.
Use the machine with its wheels always in contact with the floor.
Otherwise, it may cause a malfunction or damage to the surrounding objects.
Do not use trays or plates that are larger than the trays of the machine.
Otherwise, it may block the sensors and cause malfunction.
When placing heavy items or multiple dishes on the trays, place them at the center of the
trays for stabilization.
Otherwise, it may cause malfunction, liquid spills or dropping of dishes.
When delivering heavy items, place them on the lower levels' trays and operate the
machine on a flat floor.
Otherwise, it may cause liquid spills during a delivery or damage to surrounding objects.
Do not use in a smoking room.
It may cause failure or malfunction.
Do not place anything decorative that may hinder the machine's operation and touch
display.
Otherwise, it may hinder the operation in case of an emergency and cause a malfunction or
damage.
Do not push the machine when the power is on.
Otherwise, it may cause a malfunction or damage to the surrounding objects.
If the indoor environment in which the machine operates changes significantly
(redecoration, use of the machine in a new location, rearrangement of indoor items such
as destinations, chairs, tables, etc.), it is necessary to perform mapping again.
10