SoftBank Keenbot T5 Operational Manual page 12

Keenbot Operational Manual 2 Safety Precautions
Do not step on the power cable or subject it to excessive force when it is connected to the
charger.
Otherwise, it may break the terminal of the power cable and cause malfunction or fire.
CAUTION
Do not touch for a long time the charger when recharging it.
Otherwise, it may cause low-temperature burns. If prolonged contact with these products
causes skin irritation (itchiness, rash, eczema, etc.), immediately stop using them and consult a
doctor.
Do not use in a dusty place and do not allow dirt or other foreign matter to adhere to the
charger. If the plug is dusty, unplug it from the outlet and wipe it with a dry cloth.
Otherwise, it may cause fire, injury, electric shock, damage, malfunction, overheating, leakage
or rupture.
Do not drop or step on the charger, regardless of if it is connected or not. Do not subject it
to excessive force, such as placing objects on it or stamping on it.
Otherwise, it may damage the power cable and cause fire, injury, electric shock, damage,
malfunction, overheating, leakage or rupture.
NOTE
Use the charger in an environment within the 10°C to 40°C temperature range and with
80% maximum humidity.
Otherwise, it may cause fire, injury, electric shock, damage, malfunction, overheating, leakage
or chemical explosion, or damage to the machine / the charger.
Check that the voltage of the power source is suitable for the charger.
Otherwise, it may damage the power cable and cause fire, injury, electric shock, damage,
malfunction, overheating, leakage or rupture.
Charge the machine indoors only. Do not use outside such as on a street.
Otherwise, it may cause a malfunction or damage to the surrounding objects.
If thunder is audible, unplug the charger from the outlet.
Otherwise, it may cause a malfunction or damage to the surrounding objects.
Place the charger where it is easy to connect it with the outlet and to check the charging
status.
Otherwise, it may cause a malfunction or damage to the surrounding objects.
Always hold the plug body and not the cord when unplugging the power plug.
Otherwise, it may break the power cable and cause an electric shock or damage to the
surrounding objects .
12