Keenbot Operational Manual
4-2 Turning the Power On / Off
The power button is located on the back of the machine, on the right side under the cover.
4-2-1 Turning the power on
1
Before turning the power on, move the machine to the Origin position that was determined
during setup.
■ Move the machine directly under
the ceiling tag at the Home position
(predetermined position).
■ Only one ceiling tag is used for the
Home position.
■ There are ceiling tags on the ceiling
other than the Home position.
2
Press the power button once.
Startup takes approximately 40 seconds.
Keenbot
Keenbot Laser
■ Move the machine under the center
of three ceiling tags at the Home
position (predetermined position).
■ Three ceiling tags are used for the
Home position.
■ There is no ceiling tag on the ceiling
other than the Home position.
18
4 Operation