Cisco UC500 Series Technical Training Manual page 141

17. To configure the dialplan, add the below CLI on the
voice translation-rule 82
rule 1 /^82\(...\)$/ /\1/
!
voice translation-profile evenpod
translate called 82
!
dial-peer voice 81000 voip
destination-pattern 81...
session protocol sipv2
dtmf-relay rtp-nte
codec g711ulaw
no vad
session target ipv4:1.1.100.xx
!where xx is the WAN IP address of the ODD POD
!
dial-peer voice 82000 voip
incoming called-number 82...
session protocol sipv2
dtmf-relay rtp-nte
codec g711ulaw
no vad
translation-profile incoming evenpod
Cisco Unified Communications Technical Training
LAB 8B: UC520 Multi-site Setup
EVEN POD ONLY
Page 141 of 171