Cisco UC500 Series Technical Training Manual page 108

Security -> WPA2-PSK
Pre-Shared Key->
7. Click on "OK" to apply the updated configuration to UC520.
c) Go to the 7921 phone & click on the "down" arrow to enter "Settings"
d) Select Network Profiles and hit "**#" to Unlock the config
e) Add a new profile & hit Change
f) Add a profile name - call it UC520-xx (xx is your POD #)
g) Go to WLAN configuration:
add SSID -> podxx
Security Mode -> Auto (AKM)
Key Style -> ASCII
Pre-shared Key -> enter the key that was used above (cisco123)
h) Hit Options & Save and go back to the Main Screen
i) You should see the 7921 register to the UC520 with an auto assigned extension.
"12345678"
Cisco Unified Communications Technical Training
LAB 7B: Wireless
Page 108 of 171