Table of Contents
Advertisement
Configuration Guidelines
•
Each 7C203-1 ac power supply requires a three-pronged power receptacle capable of delivering
the current and voltage specified in
required for each 7C203-1 to provide power redundancy, and must be located within
182 centimeters (6 feet) from the site. The power cord used and type of outlet is dependent on
the country. In the United States, a power cord with a NEMA 5-15P plug is provided with each
7C203-1.
•
Ambient temperature at the installation site must be maintained between 5° and 40°C
(41° to 104°F). Temperature changes must be maintained within 10°C (18°F) per hour.
2.2
CONFIGURATION GUIDELINES
The N3 chassis has three slots that accept 7Hxxxx and 7Gxxxx modules. The slots are numbered 1
to 3. There are two slots near the bottom of the chassis that are strictly for power supplies. These
slots are labeled PS1 and PS2.
Modules for the N3 chassis are equipped with a firmware-based management tool, which provides
the capability to configure the module and access chassis, power supply, and fan tray information.
WebView™ can also be used to manage the modules and chassis.
2-2
Installation Requirements and Guidelines
Section
A.2. An ac outlet on a separately fused circuit is
Advertisement
Table of Contents
