Using The Enterasys Matrix Series Manual Set - Enterasys Matrix N3 7C103 Hardware Installation Manual

Using the Enterasys Matrix Series Manual Set

Chapter 3, Chassis Setup, contains instructions for installing the chassis as a standalone or
rack-mounted unit, installing and removing the power supply modules, removing and reinstalling
the fan tray, and powering up the chassis.
Appendix A, Specifications and Regulatory
specifications for the chassis, power supply modules, and the fan tray.
USING THE ENTERASYS MATRIX SERIES MANUAL SET
Separate manuals have been developed for the DFE modules that can be installed in the 7C103
chassis. These manuals explain how to install the DFE modules, attach cable segments to the
modules, and configure the modules using a command line interface to manage the system after the
installation of the chassis and modules is complete. The specifications for the modules are included
in their respective manual.
Each manual in this set assumes that the qualified personnel installing the module has a general
working knowledge of data communications networks and their physical layer components.
Note: You can view and download all product documentation from the Enterasys web site:
http://www.enterasys.com/support/manuals
Nota: Puedes ver y bajar toda la documentacion de productos del sitio Web de Enterasys Networks
en la siguiente liga:
Anmerkung: Jegliche Produktdokumentationen finden sie zur Ansicht oder zum „Download" unter:
http://www.enterasys.com/support/manuals
xiv About This Guide
Compliance, lists environmental and operating
http://www.enterasys.com/support/manuals