General Instructions; Warnings And Installation Precautions - ProLights CROMOSPOT250 User Manual

2
WARNING! Before carrying out any operations with the unit, carefully read this instruction
manual and keep it with cure for future reference. It contains important information about the
SAFETY

General instructions

• The products referred to in this manual conform to the European Community Directives and are therefore
marked with .
• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only. Never
make any modifications on the unit not described in this instruction manual, otherwise you will risk an electric
shock.
• Connection must be made to a power supply system fitted with efficient earthing (Class I appliance according
to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units from indirect
contact and/or shorting to earth by using appropriately sized residual current devices.
• The connection to the main network of electric distribution must be carried out by a qualified electrical in-
staller. Check that the main frequency and voltage correspond to those for which the unit is designed as given
on the electrical data label.
• This unit is not for home use, only professional applications.
• Never use the fixture under the following conditions:
• - in places subject to vibrations or bumps;
• - in places with a temperature of over 40°C or less than 2°C.
• Make certain that no inflammable liquids, water or metal objects enter the fixture.
• Do not dismantle or modify the fixture.
• All work must always be carried out by qualified technical personnel. Contact the nearest sales point for an
inspection or contact the manufacturer directly.
• If the unit is to be put out of operation definitively, take it to a local recycling
plant for a disposal which is not harmful to the environment.

Warnings and installation precautions

• Never look directly at the light beam. Please note that fast changes in lighting, e. g. flashing light, may
trigger epileptic seizures in photosensitive persons or persons with epilepsy.
• Before starting any maintenance work or cleaning the projector, cut off power from the main supply.
• Make certain that the fixture is off and the temperature of the components cannot cause burns.
• Always additionally secure the projector with the safety rope. When carrying out any work, always com-
ply scrupulously with all the regulations (particularly regarding safety) currently in force in the country
in which the fixture's being used.
• The minimum distance between the fixture and surrounding walls must be more than 50 cm and the air
vents at the housing must not be covered in any case.
• Keep any inflammable material at a safe distance from the fixture.
• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent
that their effectiveness is impaired.
• The lamp (LED) shall be changed if it has become damaged or thermally deformed.
• Don't connect the device to a dimmer pack
CROMOSPOT250
installation, usage and maintenance of the unit.