ProLights CROMOSPOT250 User Manual page 44

18
Special function
• Press the MENU button, select the [Special] menu voice and press the ENTER button to confirm the choice.
• Select the parameter to be changed between [Blackdelay] and [Reset]; press the ENTER button to confirm.
• Set the desired parameter value using the UP and DOWN buttons and press the ENTER button to confirm
the setting.
• Press the MENU button to go back or wait 30 seconds for automatic exit from the menu.
Move-in Black
Blackdelay
Reset control
Reset
Display setting
• Press the MENU button and select, via the directional buttons, the [Intro] menu choice, then press the
ENTER button to confirm the choice.
• Press the UP and DOWN buttons to select [Display] menu voice and confirm the choice by pressing the
ENTER button.
• Select a display mode [60close] or [Bright].
When in the [60close] setting, the display backlight will turn off after 60 seconds.
When in the [Bright] setting, the display backlight will stay on.
Keylock function
• Press the MENU button and select, via the directional buttons, the [Intro] menu choice, then press the
ENTER button to confirm the choice.
• Press the UP and DOWN buttons to select [Keylock] menu voice and confirm the choice by pressing the
ENTER button.
• Select a display mode [On] or [Close].
When the fixture is set as pass [On] after 30 seconds or turn on the fixture next time, the fixture will need
an access password to enter the display menu control.
NOTE. The factory access password is UP + DOWN + UP + DOWN. Press ENTER to confirm the access.
Fixture information
• Press the MENU button and select, via the directional buttons, the [Intro] menu choice, then press the
ENTER button to confirm the choice.
• Press the UP and DOWN buttons to select [Info] menu voice and confirm the choice by pressing the
ENTER button. The display will show the installed software version.
Default function
• Press the MENU button and select, via the directional buttons, the [Intro] menu choice, then press the
ENTER button to confirm the choice.
• Press the UP and DOWN buttons to select [Default] menu voice and confirm the choice by pressing the
ENTER button.
• Select [Yes] to default the fixture to its original factory settings
CROMOSPOT250
No
Yes
Dmx
System
without delay
3 seconds delay
DMX control reset
DMX cannot control reset