Fuse Replacement; Pcb Led Replacement - ProLights CROMOSPOT250 User Manual

CROMOSPOT250
21

4.4 FUSE REPLACEMENT

1. Disconnect the main plug from the socket.
2. With a flat head screwdriver, wedge the fuse holder out of its housing and remove the blown fuse from
its holder.
3. Replace the blown fuse with a fuse of the exact same type and rating.
4. Insert the fuse holder back in its place, and reconnect power.
Fuse
4.5 LED PCB REPLACEMENT
1. Disconnect the main plug from the socket
2. Take off the head cover (16).
3. Remove the fan cover (17), fan (18), fan supports (19) and heat sink (20) step by step.
4. Replace the LED PCB (21).
5. Install all parts on the original position.
16
17
19 18
20
21
Fig.14