Installer Level Operation And Configuration; The Main Menu; Panel Configuration - Ziton ZP2-AF2-P Installation Manual

Chapter 3: Configuration and commissioning

Installer level operation and configuration

The installer level is password-protected and is reserved for authorized users
installing and configuring the control panel and the fire system. The default
password for the default installer user is 4444.

The Main menu

The installer level Main menu is shown below.
Figure 24: The installer level Main menu

Panel configuration

Use the Panel setup menu to access the control panel configuration options
shown below.
Table 25: Control panel configuration
Option
ID configuration
Date and time
Day/Night mode
Regional options
Firenet
Communications
Other settings
Load/Save configuration
Expansion boards
68
Description
Configures the control panel Firenet ID (for the fire network) and
description. The description is displayed on the LCD when the
control panel is in standby.
Configures the control panel date and time, and to synchronize the
date and time in a fire network. See "Date and time" on page 53.
Configures the sensitivity settings for the day/night schedule and
for the holiday calendar. See "Day/Night mode sensitivity settings"
on page 53.
Configures the control panel's regional operation mode.
Configures the control panel fire network.
Configures TCP/IP communication settings, to manage email
accounts (for event notifications), and to safely remove a USB
device.
Configures general panel settings, including 24V AUX output, fault
mask, sounder re-sound, buzzer activation, condition notifications,
PSU supervision, etc.
Loads a new configuration, saves the current configuration file to a
USB flash drive, restores the previous configuration, or restores the
default factory settings.
Configures any installed expansion boards.
ZP2-A Series Installation Manual