Appendix A Default Configurations - Ziton ZP2-AF2-P Installation Manual

Appendix A
Default configurations
The following table shows the settings for the default configuration of your panel.
Table 73: Default configurations
Description
Power supply operation
Control panel ID
Day/night mode
Control panel network operation
Network global commands
Network mask
Repeater panel network operation
Repeater mask
IP address
Subnet mask
Gateway
Port
24V auxiliary
Fault mask
Sounders re-sound
Expansion boards for repeater
panels
Initial zone
ZP2-A Series Installation Manual
Default setting
230 VAC
01
Full day to day mode
Stand-alone
Yes
0 (all panels excluded from the mask)
Repeater
All panels repeated
192.168.104.140
255.255.255.0
0.0.0.0
2505
Not deactivated during reset, not deactivated when running
on batteries
All faults are reported
Sounders re-sound
Network board is configured
1
149