Power Supply Specifications - Ziton ZP2-AF2-P Installation Manual

Power supply specifications

Mains voltage
Mains frequency
Mains current
4 A power supply
6 A power supply
10 A power supply
CIE input voltage and current (mains on)
4 A power supply
6 A power supply
10 A power supply
CIE input voltage (mains off)
Maximum ripple at full load
Mains fuse
Typical control panel current consumption
(with no devices connected)
One-loop control panel
Two-loop control panel
Two-loop control panel with printer
Repeater panel
Typical expansion board current
consumption
Network board
DACT board
Loop board [1]
Peripherals boards [1]
2010-2-PIB
2010-2-PIB-8I
2010-2-PIB-8O
2010-2-PIB-8I8O
Zone LED boards
20/24-zones
40-zones
Quiescent current (Imax a) [2]
4 A power supply
6 A power supply
10 A power supply
Alarm current (Imax b) [3]
4 A power supply
6 A power supply
10 A power supply
ZP2-A Series Installation Manual
240/110 VAC +10% −15%
50/60 Hz ±5%
1.2 A max. at 240 VAC
1.9 A max. at 110 VAC
1.6 A max. at 240 VAC
2.8 A max. at 110 VAC
<4.0 A max. at 240 VAC
<4.0 A max. at 110 VAC
24 VDC, 4 A
24 VDC, 5.8 A
27.8 VDC, 10 A
21 to 29 VDC
150 mVpp
Note: Ripple and noise are measured at 20 MHz of
bandwidth by using a 12-inch twisted-pair wire
terminated with a 0.1 µF and 47 µF parallel
capacitor.
T 4A 250V at 240 VAC
T 4A 250V at 110 VAC
135 mA at 24 VDC
155 mA at 24 VDC
220 mA at 24 VDC
110 mA at 24 VDC
50 mA at 24 VDC
45 mA at 24 VDC
50 mA at 24 VDC
26 mA at 24 VDC
25 mA at 24 VDC
16 mA at 24 VDC
26 mA at 24 VDC
12 mA at 24 VDC
14 mA at 24 VDC
2.5 A max. at 24 VDC
2.5 A max. at 24 VDC
2.5 A max. at 27.6 VDC
4 A max. at 24 VDC (batt. charger disconnected)
5.8 A max. at 24 VDC (batt. charger disconnected)
7.2 A max. + 2.8 A for batt. charger (batt. charger
NOT disconnected) at 27.6 VDC
Chapter 5: Technical specifications
141