Connecting Expansion Boards; Connecting A Fire Network - Ziton ZP2-AF2-P Installation Manual

Connecting expansion boards

Caution:
Always disconnect the control panel from the mains power supply
before installing an expansion board.
See your expansion board installation sheet for detailed installation information.

Connecting a fire network

Note:
See your network board installation sheet for detailed installation and
connection information.
Each network board has two ports. Each port is connected (point to point) to the
corresponding ports of the network board in another control panel.
Figure 19: Network board connections
Two wiring options are possible:
• Ring configuration
• Bus configuration
ZP2-A Series Installation Manual
Chapter 2: Installation
41