Panel Activation Key - Ziton ZP2-AF2-P Installation Manual

Chapter 3: Configuration and commissioning

Panel activation key

Note: See your PAK registration guide for more details on how to register or
unregister purchased PAKs.
Select Panel Activ. Key to register or unregister panel activation keys (PAKs).
PAKs are used to extend the default functionality of the control panel - increasing
the network capability, enabling additional protocols, etc. A list of available PAKs
is shown in the table below.
Table 43: Panel activation keys
PAK
2010-2-PAK-NET128
2010-2-PAK-NET256
2010-2-PAK-RMSDK
2010-2-PAK-RMOH
2010-2-PAK-RMBN
2010-2-PAK-RMMB
2010-2-PAK-900
[1] The default network capability with no PAK installed is 32 nodes and 32 loops.
96
Description
Increases the network capability to 32 nodes and 128 loops [1]
Increases the network capability to 64 nodes and 256 loops [1]
Enables custom event reporting and command control using the
Edwards software development kit (SDK)
Enables the Contact ID protocol over Ethernet
Enables the BACnet protocol over Ethernet
Enables the Modbus protocol over Ethernet
Enables the 900 Series protocol
ZP2-A Series Installation Manual