Auto Date And Time - Ziton ZP2-AF2-P Installation Manual

Auto date and time

Select Auto date and time to configure automated date and time settings.
Configuration options are shown in the table below.
Table 44: Auto date and time options
Option
SNTP [1]
Dlight
Up_Netw
T_Zone
Up_Time
[1] See "SNTP server" on page 78 for SNTP server configuration.
To change the configuration:
1. Select Panel setup from the Main menu.
2. Select Auto date and time.
3. Configure all required settings.
4. Press F4 (Enter), and then press F1 (Back).
5. Press F1 (Save), F3 (Apply), F4 (Discard), or F2 (Exit).
Remember to apply saved settings from the Main menu.
ZP2-A Series Installation Manual
Description
Enables polling a configured SNTP server
Enables automated updates for European daylight
saving time
Enables synchronizing the date and time across the
entire network after polling the SNTP server
Configures the regional GMT time zone
Configures the time at which to poll the SNTP
server
Chapter 3: Configuration and commissioning
Default value
Disabled
Disabled
Disabled
GMT+0
00:00
97