EDAN DUS 60 User Manual page 72

DUS 60 Digital Ultrasonic Diagnostic Imaging System User Manual
2. In the vascular menu, select Vert A.
3. Measure Vert A, in the method of D trace measurement.
Reference Section 6.6.3, Generic Measurements in PW Mode
4. The results are displayed in measurement result window.
5. To begin a new Vert A measurement, repeat steps 1 through 3. You can measure a maximum
of one group of data.
13.1.5. UPPER
To measure UPPER:
1. Press Measure to activate obstetric measurement.
2. In the vascular menu, select UPPER.
3. Measure UPPER, in the method of D trace measurement.
Reference Section 6.6.3, Generic Measurements in PW Mode
4. The results are displayed in measurement result window.
5. To begin a new UPPER measurement, repeat steps 1 through 3. You can measure a maximum
of one group of data.
13.1.6. LOWER
To measure LOWER:
1. Press Measure to activate obstetric measurement.
2. In the vascular menu, select LOWER.
3. Measure LOWER, in the method of D trace measurement.
Reference Section 6.6.3, Generic Measurements in PW Mode
4. The results are displayed in measurement result window.
5. To begin a new LOWER measurement, repeat steps 1 through 3. You can measure a
maximum of one group of data.
Vascular Measurements and Calculations
- 134
-
DUS 60 Digital Ultrasonic Diagnostic Imaging System User Manual
13.2. Vascular Report
After finishing the vascular examination, the system generates a vascular worksheet.
Roll the trackball to highlight Vascular Worksheet, and press Set to display Vascular
Worksheet dialog box, as shown below:
Figure 13-2 Vascular Worksheet
The diagnosis editing column displays the cursor "І", and you can enter diagnosis information.
To print the report:
Press Print in the vascular worksheet.
Printing reference Section 5.8, Printing.
13.3. Others
Select Others to enter another application measurement.
Vascular Measurements and Calculations
- 135
-