Table of Contents
Advertisement
DUS 60 Digital Ultrasonic Diagnostic Imaging System User Manual
Parameter 2 Tab
Figure 5-14 Obstetric Presetting – Parameter 2 Tab
Item
Setting
Allows you to
D gain
0~130
Set the gain of PW image, in 2 increments.
Sample volume
1~7
Set the size of the sample volume.
PRF
0~12
Set the level of PRF.
Wall filter
0~3
Set the level of wall filter.
PW direction
Up/down
Set the PW direction.
Steer
0~7
Set the position of the sample line (for linear probes).
Correction angle
15~165
Set the correction angle.
Base line
0~6
Set the base line position.
D rejection
0~7
Set the PW rejection.
Pseudo color
0~6
Set the colorization colors.
Color temperature
0~3
Set the color temperature.
Table 5-7 Obstetric Presetting Information – Parameter 2
System Control
- 48
-
DUS 60 Digital Ultrasonic Diagnostic Imaging System User Manual
IP Tab
NOTE: IP----Image Parameter
Figure 5-15 Obstetric Presetting – IP Tab
Item
Setting
Allows you to
Select the default dynamic range for the examination, in decibels
Dynamic Range
30~150
(dB). During imaging, the dynamic range can be adjusted in 4 dB
increments.
Edge Enhancement
0~7
Select the default amount of edge enhancement to be applied.
Smooth
0~7
Set image smoothing.
Frame Persist
0~7
Set image frame correlation.
Line Average
0~7
Set image line softening attribute.
AGC
0~3
Set Automatic Gain Control.
Rejection
0~7
Set image noise restrain attribute.
Speckle Reduction
0~7
Set image speckle reduction attribute.
Table 5-8 Obstetric Presetting Information – IP
5.7.5. Presetting Formula
In the preset menu, move the cursor to highlight Formula and press Set to display formula
presetting dialog box, as shown below:
System Control
- 49
-
- Quick Links:
- Features
- Examining
- Maintenance
Hide quick links:
Advertisement
Table of Contents
