Presetting Post Processing - EDAN DUS 60 User Manual

DUS 60 Digital Ultrasonic Diagnostic Imaging System User Manual
Figure 5-16 Formula Presetting
Parameter References
Tokyo
Hellman
GS Rempen
China
Tokyo
Hadlock
Merz
Rempen
Osaka
BPD China
Hadlock
Merz
AC
HC Hadlock, Merz
Osaka
FTA
Hansmann
THD
Table 5-9 Formula Presetting Information
System Control
Parameter References
Tokyo
Hadlock
CRL Hansmann
China
Robinson
Tokyo
Hadlock1
Hadlock2
Hadlock3
Hadlock4
EFW Shepard
Campbell
Merz1
Merz2
Hansmann
Osaka
Tokyo
Hadlock
China
FL
Jeanty
Merz
Osaka
HUM Jeanty
Goldstein
CER
Oriental, Occidental
BSA
- 50
-
DUS 60 Digital Ultrasonic Diagnostic Imaging System User Manual

5.7.6. Presetting Post Processing

The preset items include gray map, rejection and gamma correction.
In the preset menu, roll the trackball to highlight Post-Proc and press Set, and then display post
processing presetting dialog box, as shown below:
Figure 5-17 Post Processing Presetting
Gray transformation presetting
The gray transformation (Gray Trans) curve has nine infection round nodes. You can reposition
them within a specific range to recalculate the curve and update the image.
To preset gray map (take map L for instance):
1. Move the cursor to one of the nine round nodes. Press Set, move the node with trackball to
adjust the curve.
2. Press Set to complete the adjustment, and the Gray Curve is renewed simultaneously.
3. Adjust other nodes using the same method.
4. Roll the trackball to Linear and press Set. Then the gray map curve turns a 45°line, and the
Gray Curve is renewed simultaneously.
System Control
- 51
-