EDAN DUS 60 User Manual page 42

DUS 60 Digital Ultrasonic Diagnostic Imaging System User Manual
6. Roll the trackball and press Set to begin a new tracing measurement. You can
measure a maximum of four groups of data. The outcome will be displayed in
the measurement result window.
7. Press Measure to finish and exit.
6.6.4. General Report
To preview the general ultrasound report:
Highlight Print Report in the B MEAS menu (B Mode Generic Measurement and Calculation
Menu), and press Set to display the general worksheet dialog box, as shown below:
Figure 6-20 General Worksheet
To edit the general ultrasound report:
Move the trackball to the text box and edit the report, and select OK to save the report and close
the dialog box.
To print the general ultrasound report:
Press Print in the General worksheet dialog box.
Printing reference Section 5.8, Printing.
- 74
-
Operation DUS 60 Digital Ultrasonic Diagnostic Imaging System User Manual
6.7. CINE Review
The system provides a storage capacity of 256 frames for CINE Review playback.
Activate the device and enter the real-time B, B/B, 4B, B/M, or PW scanning mode. Enable the
system to collect images before CINE Review playback. The cine function includes
frame-by-frame playback (manual playback) and motion playback (automatic playback). The cine
review symbol is displayed on the bottom of the screen, as shown below:
To perform the CINE Review playback:
1. Press Freeze to freeze the image, and the system displays the cine menu, as shown below:
2. Roll the trackball to start playing back frame by frame. Roll the trackball to the right to
advance the cine data one frame at a time, or to the left to move the data in reverse. The
arrow on the CINE Review Symbol indicates the direction toward which the data is moving.
The loop of data wraps around when either end is reached. As the trackball is moved, the
current cine number is displayed on the right of the CINE Review Symbol.
3. Press Cine to exit frame-by-frame playback mode and enter the motion playback mode.
4. In motion playback mode, press Play/Stop to play or to stop.
5. Press Cine to go back to the frame-by-frame mode.
6. Press Freeze to exit the CINE Review playback.
The default setting is to load images by serial numbers forward. When the number reaches the
last, it will return to 1.
During playing back, press Save As to save the file in BMP, JPG, RFM, DCM, CIN or AVI
format. You can save files to the local disk or U disk. For details about operation method, please
refer to 6.8.1 "Saving Files"
NOTE:
1. Cine review is unavailable in M-mode.
Figure 6-21 CINE Review Symbol
Figure 6-22 Cine Review Menu
- 75
-
Operation