EDAN DUS 60 User Manual page 46

DUS 60 Digital Ultrasonic Diagnostic Imaging System User Manual
To delete all:
1. Roll the trackball to select the driver and the type of file, and then press Set.
2. Press Del All, and confirmation dialog box is displayed to ask you whether to delete all the
files.
3. Press Yes to delete all the files, or No to give up the deleting operation.
To rename a file:
1. Roll the trackball to select the driver and the type of file, and then press Set
2. Roll the trackball and press Set to select the file you want to rename.
3. Press Rename to open the dialog box to enter the new name of the file using the keyboard,
with a maximum of eight characters.
4. Press OK to rename the designated file, or Cancel to give up the renaming operation.
To import from U-disk:
You can use the Import From U-Disk button to import all the files from the U disk to the local
disk.
To export to U-disk:
You can use the Export To U-Disk button to export all the files from local disk to a U disk.
6.8.5. Sending Files
If you have installed the DICOM software, and the DICOM presetting has been performed
correctly, you can send images / files.
Figure 6-28 File Menu (with DICOM Function)
To send a DCM Image
1. Highlight the secondary menu DCM Image, and then press Set.
2. If the server is running normally, the current image will be sent to the server.
3. The system displays a prompt indicating the successful transmission.
To Purchase, Visit Avobus.com
Operation
- 82
-
or call 1-800-674-3655
DUS 60 Digital Ultrasonic Diagnostic Imaging System User Manual
To send a DCM file
1. Highlight the secondary menu DCM File, and then press Set.
2. The system displays the File Opening Dialog Box for selecting a DCM file to be transmitted.
3. If the server is running normally, the selected file will be sent to the server.
4. The system displays a prompt indicating the successful transmission.
To send a DCM package
1. Highlight the secondary menu DCM package, and then press Set.
2. The system displays the File Opening Dialog Box for selecting the driver.
3. If the server is running normally, all the DCM files of the selected driver will be sent to the
server.
4. The progress bar disappears after successful transmission.
To send Cine Images
1. Freeze the system.
2. Press File to enter the file menu.
3. Highlight the secondary menu Cine Images, and then press Set.
4. If the server is running normally, the current Cine images will be sent to the server.
5. The progress bar disappears after successful transmission.
To send a Cine File
1. Highlight the secondary menu Cine File, and then press Set.
2. The system displays the File Opening Dialog Box for selecting a cine file to be transmitted.
3. If the server is running normally, the selected file will be sent to the server.
4. The progress bar disappears after successful transmission.
Operation
- 83
-