EDAN DUS 60 User Manual page 51

DUS 60 Digital Ultrasonic Diagnostic Imaging System User Manual
3. The Fetal Biophysical Profile window displays as the following figure shows. Select the
parameters from the pull-down menu of FHR, FM, FBM, FT and PL, and then press OK to
confirm, the biophysical evaluation result will be displayed in the FBP Report.
FBP Report
1. In the obstetric menu, roll the trackball to highlight the menu FBP, select FBP Report and
press Set to get the FBP report window.
2. Press Cancel to exit.
NOTE: To get the Total result in the FBP report, you have to measure the AF and input
the fetal biophysical profile and save them.
7.1.16. EDC Calculation
EDC Calculation by LMP
To calculate EDC according to LMP:
1. In the obstetric menu, roll the trackball to highlight the menu Input, and it will display
secondary menu automatically, as shown below:
Obstetric Measurements and Calculations
- 92
-
DUS 60 Digital Ultrasonic Diagnostic Imaging System User Manual
Figure 7-2 Obstetric Input Items
2. Select LMP and press Set, and the LMP input dialog box will be displayed on the screen.
Figure 7-3 LMP Input Dialog Box
3. Enter the LMP in YYYYMMDD ("Y" stands for "year", "M" stands for "month", and "D"
stands for "day") format with the keyboard.
4. Select OK and press Set to perform the calculation automatically, or Cancel to give up the
calculation.
EDC Calculation by BBT
To calculate EDC according to BBT:
1. In the obstetric menu, roll the trackball to highlight Input, and the system will display the
secondary menu automatically.
2. Select BBT in the list of input items and press Set, and the BBT input dialog box will be
displayed.
Figure 7-4 BBT Input Dialog Box
3. Enter the BBT in YYYYMMDD ("Y" stands for "year", "M" stands for "month", and "D"
stands for "day") format with the keyboard.
4. Select OK and press Set to do the calculation automatically, or Cancel to give up the
calculation.
Obstetric Measurements and Calculations
- 93
-