EDAN DUS 60 User Manual page 68

DUS 60 Digital Ultrasonic Diagnostic Imaging System User Manual
Figure 10-2 Small Parts Worksheet
The diagnosis editing column displays the cursor "І", and you can enter diagnosis information.
To print the report:
Press Print in the Small Parts Worksheet.
Printing reference Section 5.8, Printing.
10.3. Others
Select Others to enter another application measurement.
Small Parts Measurements and Calculations
- 126
-
DUS 60 Digital Ultrasonic Diagnostic Imaging System User Manual
Chapter 11 Urology Measurements and Calculations
11.1. Measurement and Calculation
The urology examination is usually in the B mode.
1. Press Exam and select Urology, and then press Set.
2. Press to enter the B mode.
3. Press Measure to activate the measurement function. The system displays the measurement
menu shown as below.
Figure 11-1 Urology Measurement and Calculation Menu
Label Description Method
Residual Urine Volume RUV (mL) = 0.7x RUV-L (mm) × RUV-W (mm) × RUV-H (mm)
RUV
(mL or L) /1000
RUV-L Residual Urine Length
RUV-W Residual Urine Width Distance (mm)
RUV-H Residual Urine Height
Prostate Volume
PV PV (mm
3 3 3
(mm , cm , or dm )
PV-L Prostate Length
PV-W Prostate Width Distance (mm)
PV-H Prostate Height
Predicted Prostate
PPSA PPSA (ng/mL) = 0.12 × PV
Specific Antigen Density
Serum of Prostate
SPSA Key in SPSA (ng)
Specific Antigen
Prostate Specific
PSAD PSAD (ng/mL) = SPSA (ng)/ PV (mL), (0.01ng ≤SPSA≤100ng)
Antigen Density
Table 11-1 Urology Measurement and Calculation Items
To determine the residual urine volume or prostate volume, take three measurements: length,
width, and height. The system calculates the volume.
Urology Measurements and Calculations
3
) = 0.52 x PV-L (mm) × PV-W (mm) × PV-H (mm) /1000
- 127
-