EDAN DUS 60 User Manual page 34

DUS 60 Digital Ultrasonic Diagnostic Imaging System User Manual
Figure 6-2 Examination Type Menu
6.4. Activating and
Deactivating
While multiple probes are connected to the ultrasound system, only one can be activated at a
time.
Press Probe repeatedly to cycle through the probes currently connected to the system. The model
of the activated probe is displayed in the top right corner of the screen.
Press Freeze to activate or deactivate a probe.
DO NOT activate intra-corporeal transducers outside the patient's body (such as E613UA
and E743UA). Otherwise, EMC requirements will not be met and harmful interference to
other devices in the environment may be caused.
NOTE:
1. You can preset the default probe for the corresponding examination type, see section
5.7.4. Presetting Examination.
2. The surface temperatures of probes C363UA, C362UA, and C321UA are 47.2 ,
45.8 , and 46.4 respectively
℃ ℃
human body.
6.5. Selecting an Imaging Mode
You can select an imaging mode by pressing
then begin an examination.
Reference Section 5.4.7, Imaging functions and section 5.2, Examining.
6.6. Measurements and Calculations
Measurement and calculation functions are contained in each examination type and imaging
To Purchase, Visit Avobus.com
a Probe
WARNING
when they work normally but don't contact with
, , , , , or
- 58
-
or call 1-800-674-3655
Operation DUS 60 Digital Ultrasonic Diagnostic Imaging System User Manual
mode. Distance and circumference will be presented in mm; area, in mm
3
in mm cm
,
To activate the measurement function, press Measure, and the light will be on.
There is one type of mark in B mode measurement: "+".
There are three types of marks in M mode measurement: "+", big "+", and a line.
The measurement results will be displayed in real-time. After measurement, the outcome is
displayed in measurement result window with a serial number. You can measure one to four
groups of data. If you continue to measure, the earliest group will be automatically covered by the
newest one.
NOTE:
1. If you perform the measurements in the frozen status, all the measurements will be
cleared when you unfreeze the image.
2. During measurement, press Back to delete the previous operation.
3. After a complete measurement, press Back to erase a measurement at a time.
The generic measurements and calculations include four sets of measurement calipers, four sets
of ellipses, four sets of measurement results at most.
The examination labels and results are shown in table 6-1.
Examination
Obstetric
℃
Cardiology
Gynecology
, and
Small parts
Urology
Vascular
Orthopedics
Abdominal
3 3
dm mL or L; time in ms or s, and heart rate in bpm, etc.
, ,
Specific measurement labels
B mode:
GS, CRL, BPD, HC, AC, FL, AFI, TAD, APAD,
CER, FTA, HUM, OFD, THD, and EFW
PW mode:
Velocity, Umb A, MCA, Fetal AO, Desc.AO,
Placent A, Ductus V
LV, RV, Mitral, Aorta, etc.
B mode:
UT, Endo, OV-Vol, FO, CX-L, UT-L/CX-L
PW mode:
Velocity, L UT A, R UT A, L OV A, R OV A
THY
RUV and PV
PW mode:
Velocity, CCA, ICA, ECA, Vert A
HIP
None
Table 6-1 Examination Items and Results
- 59
-
Operation
2 2 2
cm or dm ; volume,
, ,
Result
Fetus growth analysis curve and
standard obstetric report
Cardiac report
Gynecology report
THY report
Urology report
Vascular report
HIP report
General report