Nortel Contivity 2600 Getting Started page 55

Chapter 5
Using the Recovery Diskette
Remove the Switch's front cover. Insert the recovery diskette into the drive and
press the Reset button on the back of the Switch. This supplies the Switch with a
minimal configuration utility that allows you to view the Switch from a Web
browser.
At your Web browser, enter the Management IP address of your Switch. The
Recovery Diskette display shown in
•
•
•
•
•
•
Restore the factory default configuration or the backup configuration.
Reformat the Switch's hard disk.
Apply a new software version to the Switch.
Perform file maintenance.
View the Event log.
Restart the system.
Figure 23
Getting Started with the Contivity Extranet Switch 2600
appears, which allows you to:
55