5
Remove the filler panel screw and pull out the filler panel as shown in
Figure
21.
Figure 21 Installing LAN, WAN, or Hardware Accelerator cards.
Option card
Motherboard
6
Slide the option card into the intended slot.
Make sure the card seats firmly and evenly into the card slot. If the card is not
seated properly, it will not work.
7
Replace the card and screw.
8
Replace the top cover.
9
Replace the front bezel.
Chapter 4 Changing Hardware Configurations 51
Rear of unit
Option card slots
Getting Started with the Contivity 2600
Filler panel
CS2600017A