NetCol5000-C(030, 032, 065) In-row Chilled Water
Smart Cooling Product
User Manual
●
●
●
●
5.5 Setting Parameters
5.5.1 Setting T/H Sensor Parameters
Prerequisites
●
●
●
Procedure
Step 1 On the home screen, choose Settings > System Settings > T/H Sensor.
Figure 5-3 T/H Sensor
Step 2 If a T/H sensor outside the cabinet has been deployed in the aisle, set Return air
sensor 2 to Enable. If no T/H sensor is deployed outside the cabinet, skip
step.
Step 3 Set the temperature and humidity parameters by referring to
Issue 06 (2022-12-15)
Alarms
Checks the active and historical alarms of the smart cooling product, and
deletes the historical alarms.
Settings
Sets the involved parameters for the operation of the smart cooling product.
Maint
Checks or deletes the logs or component total runtime/run factor, manually
diagnoses each component, calibrates the sensor and touch screen, exports
data, and upgrades the system.
About
Checks the model, manufacturer, monitoring version, detail version
information, and electronic label of the display module.
If T/H sensors outside cabinets have been deployed in the aisle, enable the
sensors. Otherwise, skip
If you need to enable a T/H sensor, log in as user admin.
This section describes how to enable Return air sensor 2.
NO TE
You are not recommended to modify the parameters not listed in
Copyright © Huawei Digital Power Technologies Co., Ltd.
Step
2.
5 Power-On Commissioning
this
Table
5-4.
Table
5-4.
103