Monitoring System; Typical Application Scenarios (Netcol5000-C065) - Huawei NetCol5000-C030 User Manual

NetCol5000-C(030, 032, 065) In-row Chilled Water
Smart Cooling Product
User Manual
Function
Power
management
Features
●
●
●
●
●
●
●
●
●
●

2.2.3 Monitoring System

The monitoring system provides logic control, data collection, control demand
delivering, alarm reporting, data storage, user right management, and teamwork
control. You can connect the smart cooling product monitoring system to your
monitoring system over a northbound communications port to perform remote
management. The smart cooling product supports remote management ports and
provides RS485 ports and FE ports to support Modbus-RTU, Modbus-TCP and
SNMP for real-time data collection and alarm reporting.
Smart cooling products can be networked over the CAN bus to realize teamwork
control, energy conservation, and service life extension.

2.3 Typical Application Scenarios (NetCol5000-C065)

The NetCol5000-C provides a high-heat-flux cooling solution that applies to high-
density data centers or hot areas in common data centers. This section describes
the application scenario for the NetCol5000-C.
Issue 06 (2022-12-15)
Description
Supports alarm reporting, fault diagnosis, and alarm recording
for reverse phase, open phase, overvoltage, undervoltage, high
frequency, and low frequency; provides functions such as
automatic protection, recovery, and restart.
The display panel provides a touchscreen with a user-friendly interface.
The controller is highly precise and responsive.
The display panel is protected by a multi-level password protection
mechanism to avoid misoperation.
The password is verified each time the system is started or shut down to
ensure system operation security.
The controller provides functions such as automatic recovery after power
failure and water leakage detection, improving the system reliability.
The module displays the operating status, time, and other parameters of
components in real time.
Multiple display languages are supported.
O&M personnel can export fault records in one-click mode, making it easy to
operate the device and know the running status of the device.
The device supports communications protocols such as Modbus RTU, Modbus
TCP, and SNMP, facilitating connection to the network management system.
The display panel intelligently identifies abnormal parameter settings
(incorrect commands) and rejects them automatically.
Copyright © Huawei Digital Power Technologies Co., Ltd.
2 Product Description
26