Ingeteam INGECON SUN 1Play TL M Installation And Usage Manual page 65

Connection of accessories
The section of the cables used must be between 0.25 and 2.5 mm
at least two poles.
To insert the cable into the unit, use one of the precut holes. Cut it and fit the corresponding packing gland.
Once the packing gland has been fitted, insert the cable and connect it to the corresponding terminal. As it is a
potential-free relay, there is no polarity.
ABE2011IQM01_ - Installation and usage manual
. This device is connected using a conduit with
2
Ingeteam
DE
EN
ES
FR
IT
PT
65